The clock wants to finish everybody knows what it is, because everybody has a clock at home. What I have mentioned is how to install the clock and clock. I believe there are many friends who can't do it. Those who can't do it can have a look at it. Today, we have collected the installation pictures of the wall clock and pin taken by hengrong manufacturer during the production and assembly. Picture is truth is easy to understand. Please forgive me if you are not sure.
The clock hand is divided into hour hand minute hand second hand altogether 3 needles, short for the length is minute for the second, install the tool, find a ballpoint pen holder, the pen cylinder inner diameter can be inserted into the movement when the shaft OK, skilled after not using the tool can also operate with both hands, others are clear there is no nonsense.
1. Tear off the protective film on the time clip first, be careful not to bend it, and install it in order in time.
2. Clockwise installation: hold the clock needle at 12 points on the wall clock face with one hand, hold the tool at the same time, and slowly press down with some force to keep the distance between the clock needle and the clock face from 3 to 5mm. If the clock needle is not aligned at 12 points, fine-tune it to alignment with the rotor.
3. The needle installation is the same as the clockwise installation. Please keep the distance between the hour hand and the minute hand from 3 to 5mm. The second hand mounting is the same as above.