Choose the axis length of the quartz clock movement according to the thickness of the clock face,The total shaft length of the first movement is thirteen point five millimeter,Suitable for clock panel thickness of about two to three millimeter,The total shaft length of the second movement is eighteen point five millimeter,Suitable for clock panel thickness of about five to eight millimeter,The thickness of the clock panel is three millimeter,The back cover is two millimeter thick,Therefore, it is suitable for the movement with a total shaft length of eighteen point five millimeter.
Step one: The rubber pad is placed on the movement,Fix it on the shelf of the product and cover it with Washers,Fixed nut,Tighten it by hand and then turn it half a turn with the pliers.
Step two: Align the clock hands with the twelve o'clock parallel installation,Once installed, check that the three stitches are parallel.If not parallel manual adjustment.
Step three: Install an AA battery,clock hands began to walk,Change the time to the current time, and you're done.
